DUMP DVR ZOOM 1004H 4CH - EepromBuy

Popular Posts

Wednesday, April 8, 2020


If you have a working or password protected DVR and don't know what to do to fix it, the solution is there.

All you have to do is install new DUMPs on the EEPROM integrated circuit via the programmer.

One of the main advantages of installing DUMP is that you can repair a dead DVR, or if the DVR is password protected, you just need to reprogram the EEPROM IC, after the DVR will be unlocked.

To do this, you will need:

1. A programming device, which can be purchased from online sales sites, where you need to choose a good programming device.

2. Download the DUMP file located in the link below.

3. Open the DVR, locate the EEPROM and gently remove it to avoid damaging it.

4. Put it in your programmer, then read it and save a backup copy on your computer in case you need it later.

5. Now program the EEPROM using the DUMP file that you downloaded from the link below.

6. When finished, replace the EEPROM in its place on the DVR and turn it on.

On our site, you can download files without a hitch.

All of our DUMPs operate at 100%.

If your DUMP file is not on our list, please ask us.

We will update it as soon as possible, taking into account your needs.

The link to download the DUMP file is shown below.

kind : files .BIN

File size: 8 MB